Product Introduction：

Liquid defluoridation agent is a specialized chemical formulation designed to remove fluoride ions from water and is widely used in water treatment applications. Its primary components include inorganic coagulants such as aluminum salts, iron salts, and magnesium salts, which, upon mixing with water, form flocs with sufficient structural strength. The agent removes fluoride by chemically reacting with fluoride ions to convert them into insoluble compounds or precipitates, thereby enabling their separation from the water.

Product Advantages：

Highly Efficient Defluoridation: The agent chemically converts fluoride ions into insoluble compounds, achieving high removal efficiency—reducing fluoride concentration to below 0.5 mg/L. In practical applications, removal rates typically exceed 90%. Some advanced liquid defluoridation agents act rapidly, achieving removal efficiencies of over 98% within just 10–15 minutes.

Environmentally Friendly: Compared to traditional calcium salt precipitation methods, it generates significantly less sludge and produces no additional waste. The treatment process does not release any toxic or hazardous substances, thereby avoiding secondary environmental pollution. The resulting precipitates can also be safely disposed of using conventional methods.

Wide Applicability: It can be used effectively across a broad pH range (pH 3–10) and is adaptable to various water qualities.

Cost-Effective and Practical: It requires low initial investment—typically only an additional dosing system—and eliminates the need for expensive equipment or complex processes. Moreover, the agent can be regenerated and reused during treatment, reducing operational costs and extending its service life.

Easy to Operate: The agent is typically dosed directly into the reaction tank via a metering pump. During use, it only requires adding the chemical to the wastewater at a specified ratio and mixing thoroughly—fluoride removal is then achieved without the need for complex equipment or operational procedures.

Service Industries：

Water Treatment Industry: Used in both drinking water and wastewater treatment to reduce fluoride concentrations and ensure water quality safety.

Mining and Metallurgical Industry: Treats fluoride-containing wastewater to minimize environmental impact.

Electronics, Glass, Electroplating, and Other Industries: Used to treat fluoride-containing wastewater generated during production processes.

Photovoltaic and Optical Industry: Treats fluoride-containing wastewater generated during the production of photovoltaic and optical products, such as in processes including solar panel cleaning, etching, and coating.

Semiconductor Industry: Removes high concentrations of fluoride ions from wastewater generated during semiconductor manufacturing, which result from the use of etchants and cleaning agents.